LCM Alert Validation

AUTH TA COMPLAINT PHILLIPS CONNECT APP LIGHTING SYSTEM CH ECK CAUSE REQUEST FOR PHILLIPS CONNNECT APP LIGHTING SYSTEM CHECK AES ADDITIONALLY I FOUND THAT THE SMART 7 BOX HAS A B ROKEN COBER BOLT I ALSO FOUND THAT WHEN THE RED B RAKE CIRCUIT WAS TESTED THE BRAKE LIGHTS WORKED BU T THE MARKER LIGHTS WERE ALSO ON VERY DIMMLY BEING POWERED BY THE BRAKE CIRCUIT I TESTEED AND FOUND THAT WHEN THE BRAKE CIRCUTI IS POWERED 1V2V IS B EING SUPPLIED TO THE MARKER CIRCUIT WHEN THE VRAKE CIRCUIT IS POWERED AES ADDITIONALLY AFTER RUNNING THE LIGHTING SYSTEM CH ECK I FOUND THAT EACH CIRUCUIT IS SENDING AT LEAST 2 VOLTS TO THE MARKER CIRCUIT BOTTOM POST IN THE SMART 7 BOX I TESTED THE MARKER CIRCUIT AND FOUND THAT POWER WAS NOT BLEEDING TO OTHER CIRCUTS I MA DIAGNOSE CAUSE OF BLEEDING POWER TO THE MARKER CIR CUITS AES ADDITIOANLLY I FOUDN THAT THE MY INSPECTOR 920 SY STEM READ EACH CIRCUIT AS GOOD THOUGHT THE POWER B LEED WAS THERE AES ADDITIOANLLY I REMOVED THE WIRES FROM THE MARKER CIRUIT POSTS AND REPOWERED THE BRAKE CIRCUIT AND O THER CIRCUITS AND FOUND THAT THE MARKER POSTS WERE RECIEVING 9 VOLTS WHEN OTHER CIRCUITS WERE POWERE I CHECKED THE POWER POST AND ALSO FOUDN OF THE S MART 7 AND FOUND IT WAS RECIEVING 12V OF POWER AS DESIGNED THE SMART 7 BOX WILL NEED TO BE REPALCED TO PREVENT BLEEDING OF POWER TO CIRCUTS THAT ARE N OT BEING POWERED AES ADDITIOANLLY SMART BOX WILL NEED TO SOURCED AES ADDITIONALLY ONCE SMART 7 BOX IS REPLACED PHILLIP S CONNECT LIGHTING APP WILL BE USED TO RETEST UNIT AES